Contents
Introduction | 4 |
Accessories | 4 |
Parts and their functions | 5 |
Control panel | 5 |
Front panel switches | 11 |
Rear connector panel | 12 |
Connections | 14 |
Operation | 18 |
Turning on the power | 18 |
EXTERNAL CONTROL OUT setting | 18 |
Adjusting the minimum start speed |
|
of the pan/tilt head | 19 |
Adjusting the backlash compensation | 19 |
Adjusting the minimum start speed of the lens zoom ... 20
Introduction
Setting the travel range (limiters) of the pan/tilt head .... | 20 |
Genlock adjustment | 21 |
Total pedestal adjustment | 21 |
White balance adjustment | 22 |
Black balance adjustment | 23 |
Preset memory settings | 24 |
Setting and changing the camera menu items | 25 |
Attaching the rack mounting adapters | 26 |
Replacement of consumable parts | 26 |
How to change the position of the connector panel ... | 27 |
Appearance | 28 |
Specifications | 29 |
This unit is a multi hybrid control panel that controls the pan/tilt head system (pan/tilt head and convertible camera).
Please use a
Up to 5 additional pan/tilt head systems may be connected to this unit. The connection between the pan/tilt head system and this unit may be extended up to
3,280 feet (1,000 meters) when using
The distance may be extended to 2,624 feet (800 meters) when using other pan/tilt heads.
Use cable compensation unit
Pan/tilt heads | ||
supported | The control signals from the control panel can be connected to these units directly. | |
| ||
| The control signals from the control panel must be converted into | |
| converter before making the connection to the | |
| control is also performed using the | |
| When using | |
|
| |
|
| |
Recommended | Use the dedicated AC adapter | |
adapter | ||
| ||
|
| |
|
| |
Caution | Please contact a specialist when discarding this unit in consideration of the environment. | |
|
|
Accessories |
|
Rack mounting adapters (4U) | 2 |
1 | |
Mounting screws (M48 mm) | 8 |
4