Zanussi ZOB 383 user manual Installation, Electrical installation

Models: ZOB 383

1 16
Download 16 pages 55.01 Kb
Page 13
Image 13
Installation

Problem

The oven does not heat up

The oven does not heat up

The oven does not heat up

The oven does not heat up

The oven lamp does not operate

Steam and condensation settle on the food and in the oven cavity

The display shows “12.00”

Possible cause

The oven is not switched on

The clock is not set

The necessary settings are not set

The fuse in the fuse box is released

The oven lamp is defective

You left the dish in the oven for too long

A power cut

Remedy

Switch on the oven Set the clock Control the settings

Control the fuse. If the fuse is re- leased more than one time, refer to a qualified electrician.

Replace the oven lamp

Do not leave the dishes in the oven for longer than 15-20 minutes after the cooking process ends

Reset the clock

If you cannot find a solution to the problem yourself, contact your dealer or the service centre.

We recommend that you write the data here: Model (MOD.)

Product number (PNC) Serial number (S.N.)

Installation

Warning! Refer to "Safety information" chapter.

The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity.

.........................................

.........................................

.........................................

A

20

540

 

590

594

560

570

2Electrical installation

50

550

min

580

560÷570

 

B

Electrical installation

Important! The manufacturer is not responsible if you do not obey the safety precautions from chapter "Safety".

550

min

593

 

 

 

 

 

80÷100

560-

 

 

 

 

570

 

 

This appliance is supplied without a main plug and a main cable.

Applicable types of cables for Europe: H07 RN-F, H05 RN-F, H05 RRF, H05 VV-F, H05 V2V2-F (T90), H05 BB-

F

13

Page 13
Image 13
Zanussi ZOB 383 user manual Installation, Electrical installation