Zanussi ZOB 383 user manual What to do if…, Replacing the oven light bulb/cleaning the glass cover

1Open the door fully and hold the two door hinges.

3Close the oven door to the first opening position (halfway). Then pull for- ward and remove it from its seat. Place the door on a stable surface protected by a soft cloth.

5Release the locking system to remove the in- ternal panel of glass.

2Lift and turn the levers on the two hinges.

4Place the door on a stable surface protected by a soft cloth.

90°

	2
	1
6 Turn 2 fasteners by	7 Carefully lift and re-
90° and remove them from	move the panel of glass.
their seats.

Clean the glass panel with water and soap. Dry the glass panel carefully.

Installing the door and the glass panel

After cleaning, install the glass panel in opposite order. Make sure that when you install the internal panel with a decorative frame, the screen-printing is on the outer side. Make sure that the surface of the glass panel frame is not rough when you touch it.

Make sure that you put the internal panel of glass to the correct seats (refer to the picture).

Replacing the oven light bulb/cleaning the glass cover

Warning! Be careful! There is the risk of electrical shock!

1.Turn the glass cover anti-clockwise to remove it.

2.Clean the glass cover.

3.Replace the oven light bulb with applicable 300°C heat-resistant oven light bulb. New oven light bulb must have the same parameters as your previous one.

4.Install the glass cover.

What to do if…

Warning! Refer to "Safety information" chapter.

12