When you connect the appliance to the electrical supply or in case of a power cut, the Time function indicator flashes automatically.
To set the current time use " + " or " - " button.
After approximately 5 seconds, the flashing stops and the display shows the time of day set.
For time change you must not set an automatic function (Duration or End ) at the same time.
Preheating
1.Set function and maximum temperature.
2.Run an empty oven for 45 minutes.
3.Set function and maximum temperature.
4.Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity surface. Accessories can become more hot than in normal use. During this period an odour and smoke can be emitted. This is normal. Make sure the airflow is sufficient.
Initial Cleaning
•Remove all parts from the appliance.
•Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents! This can damage the surface. Refer to chapter "Care and
Cleaning".
Daily use
Warning! Refer to "Safety information" chapter.
Switching the Oven On and Off
1.Turn the oven functions control knob to an oven function.
2.Turn the temperature control knob to a temperature.
The temperature indicator comes on while the oven temperature increases.
3.To switch off the oven, turn the oven functions control knob and the temperature control knob to the Off po- sition.
Oven Functions
Oven function
OFF position
Oven lamp
Conventional cooking
Top heating element
Bottom heating element
Grill
Application
The appliance is OFF.
Lights up without any cooking function.
Heats both from the top and bottom element. To bake and roast on one oven level.
Heats only from the top of the oven. To finish cooked dishes.
Heats only from the bottom of the oven. To bake cakes with crispy or crusty bases.
To grill flat food items in small quantities in the middle of the shelf. To make toasts
5