REATTACHING THE REFRIGERATOR DOORS
Reattaching the Freezer Door | |
1) Reattach a phillips screw (➀) and two hex head | 2) Place the hole in the bottom of the door (➃) |
screws (➁) to the hinge. | over the hinge (➂). |
3)Insert the upper hinge shaft (➄) into the hole (➅). After levelling between the hinge brackets (➆). Reattach and close the latch (➇) along the arrow.
Connect the water tube (➈) and the wires (➉). Then, place the water tube(➈) on the hanger (11 )
Be sure to insert the water tube and push to the end.
NOTE
4) Put the connector (12 ) in the guide (13 ) of the | 5) Put the front part of the upper hinge cover (14 ) |
on the front part of the upper hinge (15 ) and | |
| reattach it from the front of the upper hinge |
cover first.
6) Reattach a phillips screw to the hinge cover (16 ).
INSTALLATION INSTRUCTIONS
29
