The Beo4 VAUX button option
On your OneRemote modified Beo4 remote control, the VAUX button in the List- menu can be programmed, to open a specific source on your non B&O TV.
VAUX options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the VMEM or VTAPE button.
LIGHT ma01p No new source selected.
LIGHT ma11p The AV1 socket on the TV is opened.
LIGHT ma21p The AV2 socket on the TV is opened.
LIGHT ma31p The DTV tuner on the TV is opened.
LIGHT ma41p The Component 1 socket is shifted to.
LIGHT ma51p The Component 1 socket is accessed.
LIGHT ma61p The HDMI 1 socket is accessed.
LIGHT ma71p The HDMI 2 socket is accessed.
LIGHT ma81p
LIGHT ma91p USB Wiselink
As the OneRemote controller is able to operate many different TV models, there might be some sources in the table, that is not available on your TV. The only way to find out if your TV accepts these codes, is testing each of the options.
If a source is not access able using these options, sources must be accessed the same way as using the TVs original remote control. Using the source button.
15
