The Beo4 DVD button option
On your OneRemote modified Beo4 remote control, the DVD button can be pro- grammed, to open a specific source on your non B&O TV.
DVD options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the VMEM or VTAPE button.
LIGHT md01p No new source selected.
LIGHT md11p The AV1 socket on the TV is opened.
LIGHT md21p The AV2 socket on the TV is opened.
LIGHT md31p The DTV tuner on the TV is opened.
LIGHT md41p The Component 1 socket is shifted to.
LIGHT md51p The Component 1 socket is accessed.
LIGHT md61p The HDMI 1 socket is accessed.
LIGHT md71p The HDMI 2 socket is accessed.
LIGHT md81p
LIGHT md91p USB Wiselink
As the OneRemote controller is able to operate many different TV models, there might be some sources in the table, that is not available on your TV. The only way to find out if your TV accepts these codes, is testing each of the options.
If a source is not access able using these options, sources must be accessed the same way as using the TVs original remote control. Using the source button.
14
