Samsung RMB4 manual Programme stepping, up/ down manoeuvring in menus, Setting the Zap Mode Option

Programme stepping, up/ down manoeuvring in menus.

Most set top boxes and TV’s has 4 arrow buttons for manoeuvring in on-screen menus, up, down, left and right. In addition they are equipped with separate programme step- ping buttons for zapping through the programme list. Often these keys are named P+, P -, CH+ or CH-.

OneRemote often makes use of the Rand the Wkeys for programme zap- ping. This way the four up, down, left and right buttons are free to be used for the more natural use of manoeuvring in on screen menus.

Using a Beo4 Navi in mode 2, manoeuvring in On-screen menus is fully handled using the added ‘joy-stick’, not available on previous Beo4 models. In a Beo4 Navi setup we therefore can make use of the up and down arrows for programme zapping.

Setting the Zap Mode Option

If the OneRemote controller is not set to operate in Navi mode, the Beo4 but-

tonsWand Rare used for programme stepping. The Dand Fbuttons are used to manoeuvre up and down in an on-screen menu. This is the default factory setting, as described above.

Selecting the Zap mode buttons:

Enter one of these 2 codes within 10 seconds to set the preffered Programme Zap mode buttons.

LIGHT mq90p The Dand Fbuttons will be used for pro- gramme zapping.

LIGHT mq91p The W& Rbuttons will be used for pro- gramme zapping.

6