Samsung RS21ASSSS/VNT manual Changing the Picture Standard, Adjusting the Picture Settings

rubens_monitor_eng 1/28/03 8:40 PM Page 22

Changing the Picture Standard

Picture

Mode ￿Custom ®

Brightness

Contrast

Sharpness

Color

Tint

Size		￿	Wide	®
Power
SOURCE	AUTO	DISPLAY	STILL
P.STD			S.STD
	P

You can select the type of picture which best corresponds to your viewing requirements.

1Press the MENU button.

Result: The main menu is displayed.

2Press the P▼ or P▲ button to select the Picture.

Result: The options available in the Picture group are displayed.

3Press the - or + button.

Result: The Mode is selected.

4Select the required picture effect by pressing the - or + button repeatedly. The following picture effects are available:

Custom - Standard - Natural - Mild.

➣You can also set these options simply by pressing the P.STD (Picture Standard) button.

➣On the Picture menu, if you change the Brightness, Contrast,

Sharpness, Color or Tint (NTSC only) settings, the Custom is selected automatically.

Adjusting the Picture Settings

		Picture
Mode	￿	Custom	®
Brightness
Contrast
Sharpness
Color
Tint
Size	￿	Wide	®

Brightness

70

Your set has several settings which allow you to control picture quality.

1Press the MENU button.

Result: The main menu is displayed.

2Press the P▼ or P▲ button to select the Picture.

Result: The options available in the Picture group are displayed.

3Press the - or + button.

4Select the option (Brightness, Contrast, Sharpness, Color or

Tint-NTSC only) to be adjusted by pressing the P▼ or P▲ button.

Press the - or + button.

Result: The horizontal bar is displayed.

5Press the - or + button to reach the required setting.

➣If you make any changes to these settings, the picture standard is automatically switched to Custom.

English-22