REMOVING THE REFRIGERATOR DOORS
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
1. Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take off the front leg cover by removing the three screws
1.With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, and then disconnect the wires by gently pulling them apart
2 .
1
2
2.Remove hinge screws 3 and the ground screw 4 by turning
upper hinge 5 . Be careful that the door does not fall on you as you are removing it
4
3
01 SETTING UP
Separating the Water Supply Line from the Refrigerator
1.Remove the water line by pressing the coupler 1 and pulling the water line 2 away.
5
3.Next, remove the door from the lower hinge 6 by carefully lifting the door straight up 7 .
7 |
6 |
1
2
Do not cut the water line. Gently separate it from the coupler.
Be careful not to pinch the water tubing and wire harness on the door.
4. Remove the lower hinge 8 using a hex wrench.
2. Removing the freezer door
A few things to mention fi rst.
•Make sure that you lift the door straight up so the hinges are not bent or broken.
•Be careful not to pinch the water tubing and wire harness on the door.
•Place doors on a protected surface to prevent scratching or damage.
setting up _15
14. 6. 10. 8:25 |