1. Safety Instructions on Service
●Unplug the refrigerator before making any repair or any replacement.
�Avoid the electric shock.
●Use the rated components on the replacement.
�Check the correct model number, rated voltage, rated current, operating temperature and so
on.
●On repair, be sure that the wires such as harness are bundled tightly and are not exposed by
water.
�Bundle wires tightly in order not to be detached by the external force.
●On repair, remove completely dust, particles or other things on housing parts, harness parts,
and connectors.
�Cleaning may prevent fire by tracking or short.
●Check if there is any trace indicating the infitration of water on electrical parts.
�If there is kind of trace, change the related components or do the necessary action
such as taping using the insulating tape.
●After repair, check the assembled state of parts.
�It must be in the same assembled state when compared with the state before
disassembly.
●Check the surrounding conditions of the installed refrigerator.
�When the refrigerator is located at humid or wet place, or the installed state is
unstable, change the location.
●If needed, do the ground.
�Especially, if there is a possibility of the electric leakage, this appliance must be
properly grounded.
●Do not allow consumers to use one outlet for several plugs.
●Check whether the power cord is placed under other appliance and so, damaged, worm-out
squeezed.
�Repair immediately the defective power plug or outlet.
�Make sure that the power cord is not placed under other appliance or squeezed.
●Do not allow consumers to keep bottles or the likes in the Freezer or to keep foods in unstable
position.
●Do not allow consumers to repair the appliance by themselves.
●Do not allow consumers to keep other chemicals except food.
�Medicines and other materials for research ; This appliance will not maintain the precisely
constant temperature for them.
�Volatile material(Alcohol, Benzene, Ether, LP gas etc.) : possibility of explosion
4