28
1) For example,,if you want to shift the Refrigerator STD temp by (34.7°F/1.5 °C), proceed the following.
It is to shift the standard temperature.The F-Room standard temp is 3 °C(MID).When it is shifted (34.7°F/1.5
°C) by using the option,the standard temp will be set to (40.1°F/4.5 °C) i.e.when the temp option is changed, it
will be controlled to (40.1°F/4.5 °C) internally even though it is set to MID on the display panel..So, shifting the
standard temperature by (34.7°F/1.5 °C) means that it is controlled by (34.7 °F/1.5 °C) increase than the temp
set on the display panel.
1-1) As shown in the draft,press the Freezer button and the FILTER RESET BUTTON OR LIGHTING
BUTTON for 12 seconds simultaneously.
- Except the Freezer &the Fridge LEDs,all LEDs will be turned off.
1-2) When it is changed to the option mode,all of the OPTION CATEGORY (I1~I5)and,the OPTION SETTING
(V1~V4) will display "0"(ALL OFF).
(The option should be set °∞0 °±for shipment,but this standard set value could be changed and shipped
for quality improvement during mass production.)
- The LED arrangements of the OPTION CATEGORY and the OPTION SETTING for diff erent specs are
as follows.
(For the Value Spec,the Dispenser LED is used due to the insufficient number of panel LEDs.)
Function & How- to-use By Products
RS2521**/RS2621**
RS2511**/RS2611**
Press for 12 sec
Press for 12 sec
I1
I2
I3
I4
I5
V1
V2
V3
V4
DIS PENSER LED
NO ICE
FRIDGE MIN (COLD)
FRIDGE MID
FRIDGE MAX (COLDEST)
FREEZER MIN
FREEZER MID
FREEZER MAX
CUBED (ICE)
CRUSHED(ICE)
NO ICE
FRIDGE MIN (COLD)
FRIDGE MID
FRIDGE MAX (COLDEST)
FREEZER MIN
FREEZER MID
FREEZER MAX
CUBED (ICE)
FRIDGE MIN
FRIDGE MID-M IN
FRIDGE MID
FRIDGE MID-M AX
FRIDGE MAX
FREEZER MIN
FREEZER MID-MIN
FREEZER MID
FREEZER MID-MAX
RS2 *1 *RS2 *2 *RS2 *3 *