Samsung RS2530BWP Checking The Water Dispenser Line, Connecting to water supply line

CHECKING THE WATER DISPENSER LINE

1)In order to operate the ice maker properly, water pressure of 20~125 psi(0.138~0.862 Mpa) is required. In this range, a 6 oz paper cup can be filled in 10 secs.

2)The water filter removes particles. It does not sterilize or destroy any micro-organisms.

3)If the refrigerator is installed in area with low water pressure (below 20psi), you should install a boost- er pump to compensate for the low pressure.

4)Ensure the water storage tank inside the refrigerator is filled. Push the water dispenser lever until the water runs from the outlet.

A Water line installation kit is available at extra cost from your dealer. NOTE Samsung recommends using a water supply kit containing copper tubing.

Connecting to water supply line

- Shut off the main water supply line and turn the Ice maker to the off position.

- Locate the nearest cold water line. - Follow the instructions in the ice maker

installation kit.

-After connecting the water supply with water filter, turn on water supply and flush 4 or more gallons into a bucket to clear the water filter.

1.Cold Water line.

2.Pipe Clamp.

3.Water Line Installation Kit.

4.Shut Off Valve.

24