ADIC FCR 200 manual Connecting the Power Cord, 17FCR200 Power Switch and Outlet

Connecting the Power Cord

The power cord shipped with the FCR200 is a 120 VAC three- conductor power cord for use in the United States or Canada. If you are planning to use another input voltage or if you plan to use the FCR200 outside of the U.S. or Canada, you must supply your own power cord.

To connect the power cord to the FCR200:

1Make sure the FCR200’s power is switched off. See Figure 4-17 for the location of the power switch on the back of the router.

2Connect the female end of the power cord to the power connector on the back of the FCR200.

3Plug the male end of the power cord into the power source.

Figure 4-17FCR200 Power Switch and Outlet

4-20 Installation

62-9301-01