ADIC FCR 200 manual Changing the Fibre Channel-to-SCSI Mapping Mode

When configuring Indexed addressing, the user is presented a table with the current mappings. The user can then select a table entry by FCP LUN and specify the associated BUS:TARGET:LUN. Alternately, the user can fill with one of multiple preset patterns, or with the list of currently attached SCSI devices. The user then saves these values in FLASH memory, where they are retained across future device resets or power cycles.

Changing the Fibre Channel-to-SCSI Mapping Mode

This option allows the user to select the appropriate Fibre Channel-to-SCSI mapping mode on the FCR200. The options are SCC addressing, Indexed addressing, and Auto addressing. Auto addressing allows you to assign one of three mapping priorities:

LUN priority	fills the table according to ascending
	LUN order.
Target ID priority	Fills the table according to ascending
	SCSI Target ID (SCSI device address
	ID) order.
Bus Number priority	Fills the table in ascending SCSI Bus
	Number (SCSI port ID number)
	order.

Fibre Channel to SCSI Mapping Mode Configuration Menu

Version: X.X.XXXX

Current Fibre Channel to SCSI Mapping Mode is Auto-assigned

Bus Number Priority

1)Set to SCC

2)Set to Indexed

3)Set to Auto-assigned, LUN Priority

4)Set to Auto-assigned, Target ID Priority

5)Set to Auto-assigned, Bus Number Priority

X) Return to previous menu

6-14 Configuration

62-9301-01