Installation Procedure
Note
Place the FCR200 so the rear fan vent and the front intake vents remain clear of obstructions to ensure proper airflow.
1Remove the router from the protective bag.
2Determine where the FCR200 will be mounted.
3Remove any blanking panels and other equipment from the chosen rack location.
4Install the cage nuts on the vertical mounting rails in the rear of the rack cabinet in accordance with the desired mounting method.
Figure 4-2 Cage Nut Installation
Ear Rail Mounting
WARNING | To reduce injury or equipment damage, the |
| mounting bracket must be level. If the |
| brackets are not level, the FCR200 cannot |
| be installed properly. |
If you are mounting the FCR200 in the front of the rack with the connectors facing the back or in the back of the rack with the connectors facing the front, attach the mounting ears, using phillips screws, as shown in Figure
