ADIC FCR 200 manual Ethernet Connection, 15FCR200 Ethernet Port

Ethernet Connection

Note

The FCR200 contains a unique Ethernet MAC address that is assigned during the manufacturing process.

10BaseT Ethernet connectivity is used to provide enhanced management and configuration capabilities. The RJ-45 connector on the unit can be directly connected to a standard 10BaseT Ethernet network.

Configuration is required to set the IP network address to allow for use of the configuration capabilities of this port. Refer to Chapter 6 for details on setting the IP network address.

Ethernet capabilities include Telnet for configuration, FTP and TFTP for firmware upgrades, and SNMP for configuration and management.

Figure 4-15FCR200 Ethernet Port

Ethernet Connection 4-17