SCSI-to-Fibre Channel Mapping
Configuration
This option allows modification of the table mapping SCSI
Target:LUN values to Fibre Channel Node:LUN values.
Configuration of these devices is similar to that for indexed addressing, without the user assists. Prior to configuring these tables, the user must enable the SCSI target and initiator addresses desired to enable the mapping for that SCSI device.
Trace Settings Configuration
This option allows trace levels to be set. This should not be modified in normal operation, as performance degradation may result.
|
| Trace Setting | |
|
| Version: X.X.XXXX | |
Level 0 | : On | Level 1 | : On |
Level 2 | : Off | Level 3 | : Off |
Level 4 | : Off | Level 5 | : Off |
Level 6 | : Off | Level 7 | : Off |
U) Update Current Operating Trace Levels
X) Return to previous menu
Further information on using this interface can be later in this chapter.
Save Configuration
This option saves the current configuration state in FLASH, and updates the saved previous configuration state.
Restore Last Saved Configuration
This option restores the most recent previously saved configuration. This can be useful when configuration changes are made, but the user wishes to return to the previously configured state.
Perform Configuration | |
|
|
|
|
