Baud Rate Configuration
This option changes the baud rate used on the serial port. Select 1) – 5) for appropriate baud rate setting. If you are using the Autobaud feature, it will not be necessary to set a baud rate. See Chapter 4 for more information on using the autobaud feature.
|
|
| Baud Rate Configuration Menu | |
|
|
| Version: X.X.XXXX | |
1) |
| 9600 | 2) | 19200 |
3) |
| 38400 | 4) | 57600 |
5) | * | 115200 |
|
|
X) Return to previous menu
Fibre Channel Configuration
This option allows for setting the Fibre Channel Address method, hard address value, and WWN overrides.
Fibre Channel Configuration Menu
Version: X.X.XXXX
Current Fibre Channel Configuration:
World Wide Name High:
World Wide Name Low:
Use Hard ALPA: No
1)Change World Wide Name High
2)Change World Wide Name Low
3)Toggle Hard ALPA Usage
X) Return to previous menu
When configuring the Fibre Channel AL_PA, the FCR200 will present a list of loop addresses along with the corresponding AL_PA. The user selects the loop address desired.
Perform Configuration | |
|
|
|
|
