Samsung RS25H5223SP/ML manual Flooring, Dimensions inch mm Model

Flooring

For proper installation, you must place this refrigerator on a level, hard surface that is the same height as the rest of the floor.

This surface should be strong enough to support a fully loaded refrigerator.

To protect the finish of the flooring during installation, cut a large section of the cardboard carton and place it under the refrigerator where you are working.

When moving the refrigerator, you need to pull and push it straight forwards or back.

Do not wiggle it from side to side.

When installing, servicing or cleaning CAUTION behind the refrigerator, be sure to pull the

unit straight out and push back in straight after finishing.

Important: Make sure that you can easily move your refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc.

The following chart details the exact height and depth of this Samsung Side by Side Refrigerator.

Dimensions [inch (mm)]			Model
		RS25H5121**	RS25H5111**	RS25H52****
Width	Only Cabinet	908
	With Leg Front	915.5
	Only Cabinet	784			up
	With Door	857.5
Depth	With Handle	919
					setting
	90° Open	F 1169 / R 1295.5
	135° Open	F 1017.5 / R 1107
	Only Cabinet	1742.5
Height	With Hinge	1776
	With Door	1776

•Allow clearance to the right, left, back and top when installing.

This will help reduce power consumption and keep your energy bills lower.

•Make sure you disconnect the water supply line BEFORE removing the freezer door.

To avoid damage, refer to ‘Separating the water line from the refrigerator’ in the manual (page 19).

English - 17

DA68-02981D-00.indb 17 2014. 1. 27.

�� 3:25