Samsung RS25H5223SP/ML manual Separate the water supply line from the refrigerator

2.Separate the water supply line from the refrigerator

1.Remove two water lines by pressing the each coupler ( 1 ) and pulling the water lines ( 2 ) away.

(1)

(2)

Do not cut the water line.

CAUTION Gently separate it from the coupler.

3.Remove the freezer door

A few things to mention first.

•Make sure that you lift the door straight up so the hinges are not bent or broken.

•Be careful not to pinch the water tubing and wire harness on the door.

•Place doors on a protected surface to prevent scratching or damage.

•Is necessary, have two people disassemble the doors.

1.With the Freezer door closed, remove the upper hinge cover ( 1 ) using a screwdriver, and then disconnect the wires by gently pulling them apart ( 2 ).

(1)		up
	(2)	setting

Be careful not to damage the sensor harness with the hinge cover.

2.Remove the hinge bolts ( 3 ) with a 10 mm Socket Wrench.

Remove the ground screw ( 4 ) by turning it counter-clockwise.

Take off the upper hinge ( 5 ) in the direction of the arrow.

Take care that the door does not fall on you.

(4)

Pressing

(3)

(5)

3.Open the Freezer door, and then remove the door from the lower hinge ( 6 ) by carefully lifting it up ( 7 ).

(7)

(6)

English - 19

DA68-02981D-00.indb 19 2014. 1. 27.

�� 3:25