LEVELLING THE REFRIGERATOR

Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so you can then make fi nal adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.

The front of the refrigerator is also adjustable.

When the Freezer door is lower than the fridge

Insert a fl at-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to level the freezer.

Leg

Screw Driver

When the Freezer door is higher than the fridge

Insert a fl at-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to level the fridge.

Leg

Screw Driver

Refer to the next section for the best way to make very minor adjustments to the doors.

MAKING MINOR ADJUSTMENTS TO THE DOORS

Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.

When the door of the freezer is higher than the fridge

Adjustment part

In the process for adjusting both the doors is the same. Open the doors and adjust them, one at a time, as follows:

1. Unscrew the

 

 

nut 1 from the

3

Wrench

lower hinge until

 

2 Bolt

it reaches the

 

1

Nut

upper end of the

 

 

bolt 2 .

 

 

When you release the nut

1 , make sure that

you use the Allen wrench provided 3 to loosen the bolt 2 in a counter-clockwise direction. You should then be able to unscrew the nut 1 with your fi ngers.

2. Adjust the

 

 

height difference

3

Wrench

between the

2

Bolt

doors by turning

 

 

the bolt 2

 

 

clockwise

 

 

or counter clockwise

.

 

When you turn clockwise , the door will move up.

3. After adjusting

 

 

the doors, turn

3

Wrench

the nut 1

 

2 Bolt

clockwise

 

1

 

until it reaches

Nut

the lower end

 

 

of the bolt, then

 

 

tighten the bolt again with the wrench

3

to fi x

the nut in place 1 .

 

 

If you do not secure the nut fi rmly, the bolt may release.

UP SETTING

English - 19

DA68-02710A (EN)-14.indd 19

2017. 8. 5. ￿￿ 9:35