Samsung RS7778FHCSR/EF, RS7547BHCSP/EF manual Controlling Temperature, Display Off Function

When you use Power Freeze the energy consumption of the refrigerator will increase. Remember to turn it off when you don’t need it and return the freezer to your original temperature setting.

If you need to freeze large amount of food stuff, activate Power Freeze function at least 20 hours before.

When you place the SHELF-BOTTOM instead of Bottom drawer, the SHELF-BOTTOM is two star section (All models). The Bottom door guard in the freezer is two star section.

(RSH7, RS77, RS7528, RS7527, RS54H, RS57H models).

So, the Temperature in the two star sections are slightly higher than other freezer compartment.

02 OPERATING

Display Off Function

To energy conservation the Panel Display turns off automatically under the following conditions: When no button has been pressed, when no doors are open, or when no Dispenser Lever has been pushed.

However, the icon indicating your Vacation or Cubed / Crushed / Ice Off, will stay on.

When you press a button, open a door, or push Dispenser Lever, the Panel Display will turn on again. Except for the Ice Type button, all function buttons will become operational after you remove your fi nger from the button you are currently pressing.

CONTROLLING THE

TEMPERATURE

CONTROLLING THE FREEZER TEMPERATURE

The freezer temperature can be set between -15 °C (6 °F) and -23 ºC (-10 °F) to suit your particular needs. Press the Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in mind that foods like ice cream may melt at -16 ºC (4 °F).

The temperature display will move sequentially from -15 °C (6 °F) and -23 ºC (-10 °F). When the display reaches -23 ºC (-10 °F), it will begin again at -15 ºC (6 °F).

Five seconds after the new temperature is set the display will again show the actual current freezer temperature. However, this number will change as the Freezer adjusts to the new temperature.

CONTROLLING THE FRIDGE TEMPERATURE

The refrigerator temperature can be set between 7 ºC (46 °F) and 1 ºC (34 °F) to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display.

The temperature control process for the Fridge works just like the Freezer process.

Press the Fridge button to set your desired temperature.

After a few seconds, the Fridge will begin tracking towards the newly set temperature.

This will be refl ected in the digital display.

The temperature of the freezer or the refrigerator may rise from opening the doors too frequently, or if a large amount of warm or hot food is placed in either side.

This may cause the digital display to blink. Once the freezer and refrigerator return to their normal set temperatures the blinking will stop.

If the blinking continues, you may need to “reset” the refrigerator.

Try unplugging the appliance, wait about 10 minutes and then plug back in.

English - 25

DA68-02710S-02.indb ￿￿2:25 2013. 12. 26. ￿￿ 7:18