USING YOUR RANGE

BAKING/ROASTING (CONT.)

5.Press the start/enter pad.

A preheating time will count down on the display. The oven control automatically sets preheating times based on the oven temperature you select:

For 245°F and less, the preheating time is 4 minutes.

For 250°F-445°F, the preheating time is 10 minutes.

For above 450°F, the preheating time is 15 minutes.

As the preheat countdown ends, the selected oven temperature replaces “PrE” on the display and the time of day reappears. You will hear a 1-second tone, indicating the oven is ready to use.

The AccuBake system electronically regulates the preheat time and temperature to maintain a precise temperature range for the best cooking results. The preheat and set temperatures may be different at the end of the countdown. This is normal.

PRESS

START

ENTER

5 SEC

YOU SEE

ON

HEAT BAKE

(example for set temperature of 350°F)

YOU SEE

ON

HEAT BAKE

NOTES:

When the oven temperature is greater than 170°F, no preheating time will be shown on the display.

You can change the temperature setting any time after pressing the start/enter pad. You do not have to press the start/enter pad again.

The preheating time will not change if you reset the temperature before the countdown time ends.

If you are baking/roasting while the minute timer is counting down, you can see the set baking/roasting temperature for 5 seconds by pressing the bake pad.

continued on next page

15

Page 15
Image 15
Whirlpool SF385PEE warranty Example for set temperature of 350F, On next