Whirlpool SF385PEE warranty Setting The Controls, Using The Self-Cleaning Cycle, Press, You See

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

NOTE: Make sure the clock is set to the correct time of day. (See “Setting the clock” in the “Using Your Range” section.

1.Press the auto clean pad.

This will automatically set a 31⁄2-hour Self-Cleaning cycle.

NOTE: There will be a 30-minute cool-down 1⁄2 hour before the cycle is over.

PRESS YOU SEE

AUTO

CLEAN

CLEAN TIME

2.Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the hour and minute pads to set the cleaning time you want. Press the “up” (s) or “down” (t) pad(s) until a time between 21⁄2-41⁄2hours shows on the display.

•Use 21⁄2 hours for light soil.

•Use 31⁄2-41⁄2hours for average to heavy soil.

PRESS YOU SEE

HR MIN

CLEAN TIME

(example shows 41⁄2-hour cleaning time)

3.Start the oven.

The door will lock as soon as you press the start/enter pad.

PRESS	YOU SEE
START		ON
ENTER	HEAT	LOCK'D CLEAN TIME

	5 SEC
4. After Self-Cleaning cycle ends and the oven	YOU SEE
reaches normal baking/roasting temperatures:

LOCK’D goes off and the door unlocks.

CLEAN

5.After the oven cools to room temperature, wipe off any residue or ash with a damp cloth or sponge. If needed, touch up spots with a mildly abrasive cleanser

or cleaning sponge.

24