Whirlpool SF385PEE The Electronic Oven Control, Display/clock, Using the control lock, p. 12 p

USING YOUR RANGE

THE ELECTRONIC OVEN CONTROL

Electronic display

SELF-CLEANING OVEN	ON
	HEAT BAKE BROIL LOCK'D	CLEAN TIMER

Oven selector pads

(pp. 14, 18, 24)

BAKE	CUSTOM	AUTO
	BROIL	CLEAN

Temperature pads

(pp. 14, 17, 19)

		TIMER								Off/
TEMP	CLOCK		SET	LIGHT	HR	MIN	START		OFF	cancel
		TIMER						ENTER	CANCEL
			OFF					5 SEC		pad
										(p. 13)
Clock	Minute			Oven	Hour	Minute		Start/enter
pad	timer set			light	pads	pads		pad
(p. 12)	and off			pad	(p. 12) (p. 12)			(p. 13)
	pads			(p. 31)

(pp. 12, 13)

Display/clock

•When you first plug in the range, everything on the display will light up for 1 to 2 seconds, then a time of day and “PF” will appear on the tempera- ture display. Press the off/cancel pad to clear “PF” from the display. If, after you set the clock (see the “Setting the clock” section), “PF” again appears on the display, your electricity was off for a while. Reset the clock, if needed.

•When you are not using the oven, the control is an accurate clock.

•When you are using the oven or minute timer, the display will show times, temperature settings, and what command pads have been pressed.

•When showing the time of day, the display will show the hour and minutes.

•When you are using the minute timer, the display will show minutes and seconds in the following sequence:

–For settings from 1-59 minutes, the display will count down each second.

–For settings 1 hour or over, the display will count down hours and minutes.

Using the control lock

The control lock lets you shut down the control panel command pads. The control lock comes in handy when you want to prevent others from using the oven.

NOTES:

•You can only use the control lock when the oven is not in use or the control has not been set.

•Set the control lock when cleaning the control panel to prevent yourself from accidentally turning on the oven.

•The control lock will stay on even after a power failure.

To lock the control panel:

Press and hold the start/enter pad for 5 seconds. You will hear a single tone and “Loc” and START “LOCK’D” will appear on the temperature

ENTER display.

5 SEC

To unlock the control panel:

Press and hold the start/enter pad for 5 seconds. You will hear 3 tones followed by a single

START tone. “Loc” and “LOCK’D” will disappear ENTER from the temperature display.

5 SEC

11