Canceling Exhibition Mode

VACATION

This icon will light up when you activate the “Vacation” feature.

If you are going on vacation or business trip or you do not need to use the refrigerator, press and hold the Child Lock button for 3 seconds.

The temperature in the fridge will be around 15 °C and the freezer will work normally. The refrigerator section should be emptied.

ALARM

This icon will light up all the time. The door alarm will sound if any door is open for more than 2 minutes. The beeping stops when you close the door.

If you need to turn off the Alarm function, press the Lighting and Fridge buttons for 3 seconds at the same time.

LIGHTING

This icon will light up when you activate the “Lighting” feature. In this case, the dispenser light (under the display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser, turn the “Lighting” feature off.

CUBED ICE , CRUSHED ICE

Enjoy cubed or crushed ice by selecting your preference from the digital control panel.

The ice type light indicates the type of ice that is currently chosen.

WATER

This icon will light up when you activate the “Water” feature.

ICE OFF

This icon will light up when you activate the “Ice Off” feature. In this case, the ice will not be produced. When Ice Off blinks on the display panel, reinsert the bucket and/or make sure it’s installed properly.

CHILD LOCK

This icon will light up when you activate the Child Lock function by pressing Child Lock button.

Press this button again to reactivate.

Use this function to prevent children from tampering with temperature and ﬁ lter settings.

POWER COOL

This icon will light up when you activate the “Power Cool” feature.

For a quick fridge cool down, use “Power Cool”.

If you select “Power Cool”, the inside temperature of the Fridge will decrease for about two and a half hours.

FILTER INDICATOR

When the ﬁ lter indicator light changes to red, it is time to change the ﬁ lter. Typically this happens about every 6 months.

The ﬁ lter Indicator will be Blue when you initially insert the water ﬁ lter.

The ﬁ lter Indicator will be purple when you have used your water ﬁ lter for 5 months.

The ﬁ lter Indicator will be Red when you have used your water ﬁ lter for 6 months.

After removing the old water ﬁ lter and installing a new one (see page 33 for instructions on how to do this), reset the indicator status light by pressing the Ice off button for about 3 seconds.

In case of Exhibition Mode, It seems CAUTION working but doesn’t make cool air.