Samsung RSH7PNPN1/XEO manual Levelling the Refrigerator, Making Minor Adjustments to the Doors

LEVELLING THE REFRIGERATOR

Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so you can then make fi nal adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.

The front of the refrigerator is also adjustable.

When the Freezer door is lower than the fridge

Insert a fl at-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to level the freezer.

Leg

Screw Driver

When the Freezer door is higher than the fridge

Insert a fl at-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to level the fridge.

MAKING MINOR ADJUSTMENTS TO THE DOORS

Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.

When the door of the freezer is higher than the fridge

Adjustment

part

In the process for adjusting both the doors is the same. Open the doors and adjust them, one at a time, as follows:

1. Unscrew the	3
nut 1 from the		Wrench
lower hinge until		2	Bolt
it reaches the	1	Nut
upper end of the
bolt 2 .

When you release the nut 1 , make sure that you use the Allen wrench provided 3 to loosen the bolt 2 in a counter-clockwise direction. You should then be able to unscrew the nut 1 with your fi ngers.

01 SETTING UP

Leg

Screw Driver

2. Adjust the
height difference
between the
doors by turning
the bolt 2
clockwise
or counter clockwise	.

When you turn clockwise move up.

3Wrench

2Bolt

,the door will

Refer to the next section for the best way to make very minor adjustments to the doors.

3. After adjusting
the doors, turn	3	Wrench
the nut 1		2 Bolt
clockwise	1	Nut
until it reaches

the lower end

of the bolt, then tighten the bolt again with the wrench 3 to fi x the nut in place 1 .

If you do not secure the nut fi rmly, the bolt may release.

setting up _11