![](/images/new-backgrounds/1212523/21252367x1.webp)
Installation
To install the ice maker kit
WARNING
To prevent electrical shock, make sure the refrigerator is turned off before installation.
1. See the figure on the left, and then locate the cover on the inner upper corner of the main unit.
2. Remove the screws (x2) from the cover, and then remove the cover by pulling it to the front.
Installation
3. Connect the wire connector of the ice maker to the socket (marked in the figure) on the main unit. Make sure the connector is fully inserted to prevent system failure.
4. Put the ice maker onto the specified area of the main unit. Make sure both the front and rear sides of the ice maker are secure to prevent deviation of the ice maker.
34 English