Installation
STEP 2 Spacing (applicable models only)
1. Open the door and locate the provided spacers (x2).
2. Unpack both spacers and attach them to the rear of the refrigerator as shown. They help ventilate air to the rear wall and save power consumption.
STEP 3 Flooring
Installation
•The surface to install the refrigerator must support a fully loaded refrigerator, or approximately 90 kg.
•To protect the floor, put a large piece of cardboard on each leg of the refrigerator.
•Once the refrigerator is in its final position, do not move it unless necessary to protect the floor. If you have to, use a thick paper or cloth such as old carpets along the movement path.
STEP 4 Adjust the levelling feet
Level the refrigerator by manually adjusting the levelling feet. Turn the levelling feet clockwise to lower the position, or turn counter clockwise to raise. For safety reasons, adjust the front side a little higher than the rear side.
30 English
