CAUTION
Before moving the refrigerator, make sure to turn the levelling feet counter clockwise so that the bottom of the refrigerator at least 66 mm from the floor.
STEP 5 Attach the door support (glass door models only)
To prevent the refrigerator from falling or shaking while it is operating or when the door guard is fully loaded but the fridge is empty, follow these instructions to attach the door support (A). This work must be done by two persons.
|
| 1. Tilt the refrigerator backward, and have |
|
| one person hold the refrigerator from |
A | the back. | |
2.The other person inserts the door support (A) into the bottom hole of the door.
3.Use a Philips screwdriver to tighten the screw.
CAUTION
To avoid personal injury or product damage from a fall or scratch, use caution throughout the entire process.
English 31
Installation
