setting up your freezer

GETTING READY TO INSTALL THE FREEZER

Congratulations on your purchase of this Samsung Freezer. We hope you enjoy the state-of-art features and effi ciencies that this new appliance offers.

•This freezer must be properly installed and located in accordance with the manual before it is used.

•Use this appliance only for its intended purpose as described in this instruction manual.

•We strongly recommend that any servicing be performed by a qualifi ed individual.

•Please dispose of the packaging material for this product in an environmentally friendly manner.

Pull the power plug out of the socket before WARNING changing the interior light of the freezer.

- Otherwise, there is a risk of electric shock.
Selecting the best location for the Freezer

•A location without direct exposure to sunlight.

•A location with fl at fl oor surface.

•A location with enough space for the freezer door to open easily.

•Allow suffi cient space to the right, left, back and top for air circulation. If the freezer does not have enough space, the internal cooling system may perform more.

•Please ensure that appliance can be moved freely in the event of maintenance & service.

￿￿￿￿￿

￿￿￿￿￿￿

￿￿

￿￿￿￿￿￿

￿￿￿￿

• Height of the product may be different depending on the models.

•Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

•Do not install the freezer in a place with the temperature lower than 10°C.

Pull the unit straight out when installing, servicing CAUTION or cleaning behind the freezer and push it

straight back after work is complete. Make sure your fl oor can support fully loaded freezer.

REVERSING THE FREEZER DOOR

Samsung recommends that reversing of the WARNING door opening is only completed by Samsung

approved Service providers. This will be on a chargeable basis and at the customers expense.

Any damage caused while attempting to reverse the door opening is not covered under the appliance manufactures warranty. Any repairs requested due to this circumstance will be completed on a chargeable basis at the customers expense.

Required Tools (Not provided)

Phillips Head

Flat Head

10mm

Socket Wrench

Driver (+)

Driver (-)

(for bolts)

 

 

8mm

 

4mm Hex

Spanner

Wrench

Socket Wrench

(for hinge shaft)

(for bottom

(for bolts)

 

hinge shaft)

 

 

1.Remove 2 screws on the top of the freezer.

Screws

06_ setting up

DA99-01951G.indb 섹션2:06

2012.6.1 2:20:29 PM