Samsung SADPCI-202 instruction manual Deleting Channels, Clear All Channel Info

Deleting Channels:

You can choose one of the two following methods:-

Delete Channels - you may select individual channels for deletion. Clear All Channel Info - you may delete all channels in one operation.

1. Deleting Channels:

Move the cursor to highlight “Delete Channels” in the Channel Setup menu and press OK.

By default TV channels are listed, press the RADIO key to access the Radio list.

Use the UP/DOWN/LEFT/RIGHT keys to move the cursor, highlight the channels you wish to delete and press F1 to tag the channels to be deleted. Notice that the tagged channels now have an “X” tag next to them (Pressing F1 will remove the tag).

If you wish to tag all the channels, press F2. (Pressing F2 again will remove all the tags)

If you wish to preview the channel before tagging, press Info. You can tag channels while in pre- view mode - changing channels with UP/DOWN keys, and tagging them with F1. Press the Info key to return to the “Delete Channels” menu.

TV Channels

1	Sky 1	X
2	CNN
3	NBC	X

4Movies 1

5Sky news

6Discovery

7Kiosk 2

8NRK 1

Hotbird 13.0E

Radio	List radio
	channels
Info	Play Channel
	Toggle tag
F1	All tags on
F2	Delete tagged
OK	channels
	cancel
ESC

Once you have tagged all the unwanted channels press OK to confirm.

Press F2 key to confirm deletion or press any Other key to return to the Delete Channels menu.

TV 124		Canal +	19.2E
	F1 – toggle delete	ESC – exit	Delete
SAMSUNG			Signal

2. Clear All Channel Info:

Only use this option if you would like to DELETE ALL CHANNELS stored in your receiver. All stored channels in the receiver will be erased at the end of the following procedure:

From the Main Menu select Channel Setup and Delete.

You will be prompted with a warning screen:	Warning
Follow the on-screen messages to proceed
	Are you sure you want to continue?
in deleting all your channels or to abort.
	You will lose ALL channel information
Finally, press OK to confirm deletion of all	Press OK to continue
	any other key to exit
channel information.

Note:

The above procedure will delete all stored channels in the receiver’s memory. Any modifications made to the receiver’s set-up (LNB settings, Parental Lock etc.) will NOT be affected. For instructions on how to reset the receiver to factory condition please refer to the Reset to factory defaults section in this manual.

21