1. Video Menu:
CH Name:
Displays channel name. To change the channel name, move the cursor by using Left/Right key. Then you can change the channel name by using Up/Down key.
SAT:
Displays the satellite group the current channel belongs to. You can change the channel/satellite assignment by using the Left/Right keys. Frequency:
Displays the channel frequency. You can change the frequency by using the Left/Right keys or
Polarity:
The polarity setting.
Skew:
Optional polariser control (up to 16 different configurations). Note: Only on models fitted with the polariser control option
Bandwidth (option):
The selected IF bandwidth (default 27MHz).
Deviation
Controls the video level (brightness) in four steps.
LT Level (option):
Where applicable, you can adjust the threshold (sensitivity) of your receiver under weak signal conditions (32 steps).
Note:
Use OK key to store changes and ESC to exit menus.
You can use the auxiliary Left/Right keys to change channels whilst in menu mode allowing quick changes to the settings of other
channels.
VIDEO | P001 |
CH NAME | ALMATV |
SAT01 | ARABSA 2A,3A |
FREQUENCY | 11.823MHZ |
POLARITY | VER1 |
SKEW | |
BANDWIDTH | 27MHZ |
DEVIATION | 4 |
LT LEVEL | 01 |
UP/DN, LR,
2. Audio Menu:
Audio No:
Numbers
Displays the Left channel audio
Displays the Right channel audio
Mode:
Selects between STEREO and MONO audio format.
Bandwidth:
Displays the selected IF bandwidth setting (selectable between 130/180/280/500KHz).
De emphasis:
Displays the selected
Note:
Only audio numbers
Note: Radio Key
Radio channels are usually transmitted alongside video channels, use the RADIO key to enable the blue screen. Should you wish to block out the pictures press STORE to store this function to the selected channel.
AUDIO | P001 |
IO | NO |
33 |
|
6.60MHZ | |
6.60MHZ | |
MODE | MONO |
BANDWIDTH | 280KHZ |
DEMEMPHASIS | 50US |
50US |
|
UP/DN, LR,
ALMATVP001
DDINT
P001
Radio
Radio
29