You can use the Clerk function as standard. Or you can set up the System option to allow. You can input a secret code for each clerk.
The secret code is made up of 3 figures, which are numbers between 100 and 999.
Each clerk has his own number between 1 and 4. To operate 4 clerks.
Refer to the System option No.19, please. Clerk of System option is divided three modes.
One is not setting up the Clerk function, another is setting up clerk function Stay down mode, and the other is Pop up mode.
Stay down mode is typically used in supermarkets where only one operator uses the register in a time period.
Pop up mode signs off the operator automatically after each receipt. This mode is used in restaurants or similar types of stores where servers one after the other are using the register during the same period.
NOTE !! Refer to
3-6-1. SETTING UP SECRET CODE OF CLERK
The method of setting up secret code numbers for clerks is as follows.
CLERK - n1 n2 n3 n4 - CLERK └────┘ └ Clerk No. Secret code
Example. Set up the secret code of clerk1, 123.
Set up the secret code of clerk2, 222.
CLERK | 1 | 2 | 3 | 1 | CLERK |
|
| |
* 1 | # S | |||||||
|
|
|
|
|
| |||
CLERK | 2 | 2 | 2 | 2 | CLERK | * 2 | # S | |
|
| |||||||
|
|
24
