Samsung SCC-B5369 Deactivated, Fence will be deactivated, ‹PRIVACY Zone SET1‹, Position

How to use OSD Menu

Use the cdef switch to select one from PRIVACY 1 through 12.

Select one from PRIVACY 1~12 and press the SETUP switch to confirm your setting. You can specify a pixel that moves as you change the PIXEL LEVEL to set the position.

‹PRIVACY ZONE SET1‹

①By pressing the SETUP switch in <POSITION>, you can move the overall position of the privacy zone.

②Use the cdef switch to move the position and press the SETUP switch to confirm it.

Note :

			– If more than one PRIVACY ZONE is specified and the
PIXEL LEVEL	[4]		PRIVACY SET is set to ON, the PIP function will be
<POINT>￿			deactivated.
<POSITION>￿
			– If the 12th PRIVACY ZONE is specified, the LINE function
			of FENCE will be deactivated.
￿ ￿ ￿	￿	￿

ENG

- How to set the point

You can set each position of the 4 points.

①If you press the SETUP switch in <POINT>, you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move.

②Use the cdef switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning.

-How to set the position

You can move the position of the overall area.

English – 29