❚Installation precautions
1.Make sure that the installation site can sufficiently support a minimum of four times the net weight of the
2.Keep persons away from the installation area, as there is a risk of falling objects. Also, move valuables to a safe location before installation.
❚Installation
1.As in the <PIC 1> below, pull out the cables in connection with the camera through the pipe into which the ROD COUPLING is installed. Refer to <PIC 2> and wrap the screw part of the
Pipe with the Teflon Tape. In the next step, insert the Cables through the center of the ROD
COUPLING and pull them out to the opposite side. Fix the ROD COUPLING to the end of the processed Pipe with a 1.5” NPT screw thread by turning it clockwise, as described in the
<PIC 3>.
PIPE 
PIPE 
TEFLON TAPE
1.5" NPT 
1.5" NPT 
ROD COUPLING
< PIC 1 >
< PIC 2 >
< PIC 3 >
23
