Samsung SCC-C7453P manual Installation

INSTALLATION

1.Press the SNAP FIT of the ADAPTOR in the HOUSING to open the ADAPTOR part, and then insert all external cables into the HOUSING. Secure the HOUSING on the PIPE or MOUNT by turning it clockwise.

(Secure two components tightly, to avoid loosened HOUSING.)

PIPE OR	PIPE OR
MOUNT	MOUNT
HOUSING	HOUSING

EXTERNAL

CABLE

ADAPTOR

SNAP-FIT

2.Connect external cables to the CONNECTORS(ALARM IN, POWER, RS-485, ALARM OUT) and connect the CONNECTOR to the ADAPTOR.

Insert the cable into the FRAME SET, and close the ADAPTOR.

BNC JACK

HOUSING

English

POWER INPUT ALARM OUT

INSULATION TUBE

ALARM IN RS-485 EXTERNAL

CABLE

ADAPTOR

M Then, wrap the BNC JACK with the INSULATION TUBE, and use an insulation tape to seal up the end of the INSULATION TUBE so that the BNC JACK does not protrude outside of the INSULATION TUBE coating.

For more information about cable connection, refer to Connecting the adaptor cable. (page 19)

English _11