Samsung SCC-C7453P manual Nish Auto PAN setup

setup

3.Select each item and set appropriately. y POSITION : Set the starting and ending

positions for the <AUTO PAN>. Move to the setting screen and adjust pan/tilt to the desired starting position, and then press [ENTER].

Again, adjust pan/tilt to the desired ending position and press [ENTER] to

finish <AUTO PAN> setup.

	AUTO PAN 1
POSITION
DIRECTION		LEFT
ENDLESS	[10]	OFF
SPEED
DWELL TIME		3SEC

yDIRECTION : Sets the direction of the camera’s movement from the starting to the end position. (Based on panning)

<RIGHT><LEFT>

START	START
END	END

yENDLESS : Instead of shuttling between start and end positions, the camera turns 360° endlessly while stops for the <DWELL TIME> at both positions.

ySPEED : Sets the moving speed of the camera, from 1 to 64.

yDWELL TIME : Sets the dwell time at the starting and ending positions, from 1 to 60 seconds.

38_ setup