59
Accepting Incoming Beams
To set your i760 to accept all incoming beams, follow these steps:
1. From the Tod ay screen, tap Start ( ) located in the upper left corner of
the screen.
2. Tap Settings ( ). By default, the Personal tab is highlighted.
3. Tap th e Connection tab.
4. Tap Bluetooth ().
5. Tap th e Mode tab.
6. Tap th e bo x Turn on Bluetooth and the box Make this device visible to
other devices. A check mark will display in the boxes.
7. Tap to start recieving incoming beams.
Adding Notes to Contacts
Notes allow you to attach either a recorded audio file or attach a written note to a
saved contact entry. When you view the summary screen on the contact, you can
view or listen to any notes that are associated with the contact.
Adding a Note
1. From the Tod ay screen, tap Start ( ) located in the upper left corner of
the screen.
2. Tap Contacts ( ) to reveal the Contacts screen.
3. Locate the desired contact by using either the Enter a name... field or
scrolling through the contact list.
4. Tap the contact entry.
5. Tap th e Notes tab.
6. Tap th e Edit soft key to open the notepad.
7. Enter the note using the desired entry method.
ok