Changing Connection Information

Changing Connection Information

Using either the Wireless or Network Adapters tabs under “Network Card,” you can change your connection information. If your Wi-Fi network encrypts data with a security key (WEP) or you need WPA authentication to connect to your Wi-Fi network, you can set the configurations under Wireless tab. The Network Adapters tab allows you to choose whether you use a fixed IP or the DHCP (Dynamic Host Control Protocol).

To get the connection information for the Wi-Fi network you are connected to, follow these steps:

1.Tap Start () located in the upper left corner of the screen.

2.Tap Settings ( ). By default, the Personal tab is highlighted.

3.Tap the Connections tab.

4.Tap Wi-Fi() to open the Configure Wireless Networks screen.

5.Tap the Network Adapters tab.

6.The current connection property appears in the My network card connects to:, and displays as either The Internet or Work.

Tap The Internet if the network connects to the Internet (does not use proxy settings) or Work (uses proxy settings).

7.If your Wi-Fi network encrypts data with a security key (WEP) or you need WPA authentication to connect your Wi-Fi network, you can set the configuration on the Wireless tab.

8.Tap the adapter you wish to change or configure.

9.From the screens that follow, set or change the settings, and tap ok to save your changes.

10.Confirm the changes, and tap ok again to return to the previous screen.

Bluetooth and Wi-Fi Services 154

Page 157
Image 157
Samsung SCH-i760 user manual Changing Connection Information, Tap the Network Adapters tab