Changing Your Settings 92
Setting a Phone Password
9. Tap t he Version Info tab to view the R2VS software version information.
Setting a Phone Password
For more information, refer to "Locking Your i760" on page 24. The password
option allows you to enable or disable a password. The available settings are:
• Simple PIN: This password must be at least four characters in length and can not
contain a simple sequence such as: 000, 1111, or 1234.
• Strong alphanumeric: This password must be at least seven characters in length
and contain at least three of the following: uppercase/lowercase letters, numerals,
and punctuation.
When a password is configured, there is a “prompt if device unused” option that
allows a length of time range from 0 minutes - 24 hours. When this option is set, you
can continue to use the i760 until the screen turns off due to inactivity. If the device
is inactive for a greater amount of time than specified in this setting, a password
must be entered when you turn the device back on.
To set the password:
1. From the Tod ay screen, tap Start ( ) located in the upper left corner of
the screen.
2. Tap Settings ().
3. Tap t he Perso nal tab.
4. Tap Lock ( ).
5. Tap the check box next to Prompt if device unused for.
6. Tap t he Minutes drop down menu and select the amount of unused time
required before you are prompted for a password if the phone becomes
idle.
7. Tap t he Password type box and select either Simple PIN or Strong
alphanumeric.
8. Tap t he Password box and use either your QWERTY keypad or keypad to
enter the password you want. Re-enter the password in the Confirm box.
9. Tap , then tap Yes to confirm.
ok