Samsung SCX-5312F, SCX-5112 manual Making Copies from the Automatic Document Feeder

Making Copies from the Automatic Document Feeder

Using the ADF(Automatic Document Feeder), you can load up to 30 documents (20lb, 75 g/m2) in one job. Ensure documents are in good condition, have the same thickness and weight, and that all staples and paper clips have been removed.

1Feed the documents (up to 30 pages) face up into the ADF and adjust the document guides to the document size. Make sure that the bottom of the document stack matches the paper size marked on the ADF.

4

Document guides

2SCX-5312F users should verify that the product is in the Copy mode. If necessary, press Mode/Enter to change the mode into the Copy mode. In the Copy mode, the LCD display shows:

Copy size Number of copies

Note that you cannot make copies in the Fax mode. The product will only sound an error beep.

3Make sure that you have selected the required paper tray. See page 4.2.

4Customise the copy settings incluing the number of copies, copy size, contrast and image type using the control panel buttons. See “Setting Copy Options” on page 4.6.

To clear the settings, use the Stop/Clear button.

5If necessary, you can use special copy features such as collation and duplex copy.

COPYING 4.3