Samsung SCX-5112, SCX-5312F manual Auto Fit

Auto Fit

This feature automatically reduces or enlarges the original image to fit on the paper currently loaded in the prodcut, so you cannot adjust the copy size.

This special copy mode can be applied when you load document only using the document glass. So if a document is detected in the ADF, the Auto Fit does not work.

1Load the document to be copied on the document glass, and close the cover.

2Make sure that you have selected the required paper tray. See page 4.2.

3To enter the special copy mode, SCX-5312F users should press Special Copy in the Copy mode (see page 4.5) and SCX-5112 users should press Autofit/Clone.

4Press Special Copy (Autofit/Clone on SCX-5112) repeatedly or use the navigation buttons until “AUTO FIT” appears on the bottom line of the display.

5Press Mode/Enter (Enter for SCX-5112) to save the selection.

6If necessary, customise the copy settings incluing the number of copies, contrast and image type using the control panel buttons. See “Setting Copy Options” on page 4.6.

NOTE: You cannot adjust the copy size by using the Zoom button while the Auto Fit printing is enabled.

7Press Copy/Start to begin copying.

8When the copying is completed, press Stop/Clear to cancel the Auto Fit mode.

4.8 COPYING