Management tools_ 102

Setting network values

1. Print the machine’s Network Configuration Report to find your
machine’s MAC address.
2. From the Windows Start menu, select Programe or All Programs >
Samsung Network Printer Utilities > SetIP > SetIP.
3. Click to open the TCP/IP configuration window.
4. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
5. Click OK. The machine prints the network information. Confirm the
settings are correct.
6. Click Exit.
USING THE LINUX UNIFIED DRIVER CONFIGURATOR
The supplied software CD provides you with the Linux Unified Driver
package for using your machine with a Linux computer.
Unified Driver Configurator is a tool primarily intended for configuring
machine devices. Since a machine device combines the printer and
scanner, the Linux Unified Driver Configurator provides options logically
grouped for printer and scanner functions. There is also a special machine
port option responsible for the regulation of access to a machine printer and
scanner via a single I/O channel. Also, you can monitor a number of
machine devices via fast ECP parallel ports and USB simultaneously.
After the driver is installed on your Linux system, the Linux Unified Driver
Configurator icon will automatically be created on your desktop.

Opening the Unified Driver Configurator

1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
2. Click each button on the left to switch to the corresponding configuration
window.
To use the on screen help, click Help.
3. After changing the configurations, click Exit to close the Unified Driver
Configurator.

Printers configuration

Printers configuration has the two tabs: Printers and Classes.

Printers tab

1
2
3
View the current system’s printer configuration by clicking on the
machine icon button on the left side of the Unified Driver Configurator
window.
The printer control buttons are, as follows:
•Refresh : Renews the available machines list.
•Add Printer : Allows you to add a new machines.
•Remove Printer : Removes the selected machine.
•Set as Default : Sets the current selected machine as a default
machine.
•Stop/Start : Stops/starts the machine.
•Test : Allows you to print a test page to ensure the machine is
working properly.
•Properties : Allows you to view and change the printer properties.
1Printers
Configuration
2Scanners
Configuration
3Ports
Configuration
Switches to Printers configuration.
Shows all of the installed machine.
Shows the status, model name and URI of your machine.