Samsung SCX-RD100 See the following table to set the baud rate.,

1 22

18 – COAXIAL REMOTE CONTROLLER

Connection & Control

See the following table to set the baud rate.

TERMINATION

PROTOCOL

234567856

1. SAMSUNG

BAUD RATE PIN 5 PIN 6

38400 BPS OFF OFF

19200 BPS ON OFF

9600 BPS OFF ON

4800 BPS ON ON

2. PHILIPS

BAUD RATE PIN 5 PIN 6

38400 BPS OFF OFF

9600 BPS ON OFF

3. PANASONIC

BAUD RATE PIN 5 PIN 6

19200 BPS OFF OFF

9600 BPS ON OFF

4800 BPS OFF ON

4. DIAMOND, VCL TP

BAUD RATE PIN 5 PIN 6

9600 BPS OFF ON

Â Only supports 9600 bps

–

Contents

Main Safety information CAUTION Page Important Safety Instructions Contents INTRODUCTION Features Whats Included List of controllable models q r o p n G t q r n p s o P If you specify the address as other than between 0 and 255, it will be set to 0. Rear Panel PART NAMES AND FUNCTIONS Top nopqr C I N Installation CHECKING INSTALLATION ENVIRONMENT INSTALLATION PRECAUTIONS TO CONTROL THE CAMERA COAXIAL COMMUNICATIONS T V S TO CONTROL THE CAMERA USING RS-485 DEVICE VIA COAXIAL COMMUNICATIONS TO CONTROL THE CAMERA USING RS-232 DEVICE VIA COAXIAL COMMUNICATIONS T O TO CONTROL THE CAMERA USING RS-485 SIGNAL OUTPUT TO CONTROL THE CAMERA USING RS-485 SIGNAL OUTPUT VIA RS-232 COMMUNICATIONS S ENG English 17 SWITCH SETTING TABLE Use a combination of pin 1,2,3,4 of the Protocol setting switch to select a protocol. RS-232 and RS-485 communications cannot be used for simultaneous input. Use pin 7 and 8 of the Protocol setting switch to set the coaxial output. PIN 7 Output Selection ON COAXIAL out OFF RS-485 out See the following table to set the baud rate. Page Speci cations SPECIFICATIONS D Item Description Page AB68-00857A Correct disposal of batteries in this product Correct Disposal of This Product (Waste Electrical & Electronic Equipment)