Connecting to Monitor

Connect the VIDEO Out jack to the monitor VIDEO In jack.

CCD Camera

Monitor

Connecting to Power

Each model has different power specification, please check the name of the model and power specification before connecting to power source. Please refer to the sticker identifying the model, which is attached on the product, for power specification.

As a connecting method varies according to instruments, refer to the manual supplied with the instrument.

Connect the cable after power is turned off.

Set the 75Ω /Hi-Z selection switch as shown below if you have intermediate device.

CCD Camera

Intermediate

End monitor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AC outlet

220V

100V

AC adaptor

220V

AC24V GND

100V

AC adaptor

230V

230V~50Hz

•The wire is polarized. Be sure to connect the wire with white line on its covering to‘ - ’terminal and

connect the other one to ‘ + ’teminal.

•Use DC 12V power source for SDC-311(241) ND/PD.

•Use AC 24V~50Hz power source for SDC-311(241)PA.

(The wire is non-polarized.)

•The wire is non - polarized. •Use AC 24V 60Hz power

source for SDC-311(241)NA. Connect the wire by pushing the

button

•Use AC 230V~50Hz power source for SDC-311(241)PH.

16COLOR CCD CAMERA

•Be sure to connect power after all the installation is done. •Note that AC adaptor is not supplied with camera.

•Since the wire of DC power type is polarized, be careful when Connecting it.

COLOR CCD CAMERA 17

Page 9
Image 9
Samsung SDC-311 SERIES, SDC-241 SERIES instruction manual Connecting to Monitor, Connecting to Power