Troubleshooting
If you have trouble operating your camera, refer to the following. If the guidelines do not enable you to solve the problem, contact an authorized technician.
Problem | Solution | |
|
| |
| • Check that the power cord and line connection | |
| between the camera and monitor are made | |
| properly. | |
Nothing appears on the |
| |
screen. | • Check that the DC/VIDEO selection switch on the | |
| rear of the camera is set to a proper position | |
| according to the type of your auto iris lens. | |
|
| |
The image on the screen | • Check that you have set ESC feature | |
is dark. | ||
| ||
|
| |
The image on the screen | • Check if the lens are stained. If | |
dirty, clean the lens with soft, | ||
is dim. | ||
clean cloth. | ||
| ||
|
| |
The camera is not work | • Check that you have connected the | |
properly, and the surface | ||
camera to a proper power. | ||
of the camera case is hot. | ||
| ||
|
|
Problem | Solution |
|
|
The color of the picture is not | • Check that you have properly set White Balance |
matched. | Control Mode. |
|
|
The contrast on the screen | • Adjust the contrast feature of the monitor. |
| |
is too weak. | • If the camera is exposed under too strong light, |
| change the camera position. |
|
|
| • Does the camera face to directly to the sun or |
| fluorescent lighting? |
The image on the screen | Change the camera position. |
flickers. | • Check that the DC/VIDEO selection switch on |
| the rear of the camera set to a proper position |
| according to the type of your auto iris lens. |
|
|
| • Check that you have used 50Hz (PAL models), |
The image on the screen is | 60Hz(NTSC models) the linelock synchronization |
distorted. | mode cannot be used. |
| Use the Synchronization Mode to INT mode. |
|
|
20 | COLOR CCD CAMERA | COLOR CCD CAMERA | 21 |
