Samsung VKKF011NEX, SHR-1041 user manual Hdd event, ALarm input, ALarm output

hdd event
. In the <system setup> window, use the direction	CAM1			CAM1
buttons ($%_+/ENTER) to select <event/sensor>.
		EVENT/SENSOR
. Select <hdd event> and use the up/down buttons		HDD	DISK FULL EVENT		ON
		EVENT
($%/ ENTER) to set a desired item.		INPUT
		ALARM
• disK FuLL event : You can set to notify the user when		ALARM
the HDD is full.		OUTPUT
	CAM1BUZZER			CAM1
- This is applied only if you have set <overwrite> in		OUTPUT
<disK management> to <oFF>.		E-MAIL
		NOTIFICATION
. When your settings are completed, click <appLy> on the				APPLY	UNDO
bottom.
Your settings will be applied.
aLarm input
. In the <system setup> window, use the direction buttons ($%_+/ENTER) to select <event/
sensor>.
. Select <aLarm input> and use the direction buttons	CAM1			CAM1
($%_+/ENTER) to set a desired item.
		EVENT/SENSOR
• operation : Set the connection status of the alarm		EVENT		OPERATION
sensor to either ENABLE or DISABLE.		HDD
		ALARM	2	DISABLE
			1	DISABLE
- If the alarm sensor is set to <enaBLe> and you have		INPUT	3	DISABLE
		ALARM	4	DISABLE
set to perform recording if an alarm occurs, the Live
		OUTPUT
screen displays the alarm recording standby mode.	CAM1BUZZER			CAM1
		OUTPUT
(Page 18)		E-MAIL
- The INPUT type of the alarm is N/O(Normal Open).		NOTIFICATION
				APPLY	UNDO
. When your settings are completed, click <appLy> on the
bottom.
Your settings will be applied.

● settings

aLarm output

.In the <system setup> window, use the direction buttons ($%_+/ENTER) to select <event/sensor>.

.Select <aLarm output> and use the direction buttons ($%_+/ENTER) to select and set a desired item.

•operation : Set the operation of the alarm output.

-If set to <enaBLe>, the applicable menu is activated where you can set other options.

-If set to <disaBLe>, other items will be disabled.

•mode : Set the output mode of the alarm.

-If set to <Latched>, the alarm will sound for as much time as defi ned in DURATION.

CAM1				CAM1
	EVENT/SENSOR
	HDD	OPERATION	DISABLE	HDD EVENT	ON
	EVENT
		MODE	LATCHED	DURATION	5 SEC
	ALARM
	INPUT		ALARM	VIDEO LOSS	MOTION
	ALARM
	OUTPUT	1
CAM1	BUZZER	2
		3
	OUTPUT	4
	E-MAIL
	NOTIFICATION
				APPLY	UNDO

-If set to <transparent>, the DURATION item will be disabled.

•hdd event : Set to use the alarm output if the HDD is full.

•duration : Set the duration of the alarm output.

-If you select <until>, the buzzer will be stopped when you press any button on the front panel or the remote control.

•aLarm, video Loss, motion : Set the alarm output for each channel if an event of alarm, video loss or motion detection occurs.

.When your settings are completed, click <appLy> on the bottom. Your settings will be applied.

English _