O p e r a t i o n
Move the joystick right to select off, then
5 move the joystick up or down to select “on”.
When any of the timers are set, the “Timer” LED will illuminate (front or side panel of TV.).
When you are finished, move the joy-
6 stick right.
If you want to set the Off time, move the
7 joystick down to select the “Off Time”. Set the “Off Time” just as you set the “On Time”.
If you want to set the volume level or
8 channel when the TV turns on, move the joystick down to select “On Timer Vol.” or “On Timer CH”. Move the joystick right to set the volume level or to select the channel you want when the TV turns on. Press the Menu button to return to normal viewing.
Setting the Sleep Timer
You can set your TV to automatically turn off after a preset interval.
Press the Sleep button on the remote con-
1 trol.
You’ll see “Off” at the bottom of the
2 screen. Press the Sleep button to select the time interval for the TV to stay on. The interval ranges from 10 to 360 min- utes.
44
Viewing an External Signal Source
Selecting the Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as VCRs, DVD,
Make sure that the remote
1 control is controlling the TV set. Press the MODE button and make sure that the “TV” LED is illuminated.
Press TV/VIDEO on the
2 remote control, and the fol- lowing
Move the joystick up or down
3 to select a particular signal source, and then press the joystick to activate it.
When you connect equipment to the TV, you can choose between the following sets of jacks: Video 1, Video 2,
Remote Control VCR/DVD Buttons
Flip the cover of the remote control up to access buttons that can control the tape functions of a connected VCR or DVD, including Rewind, Play, Fast Forward, Stop and Pause.
Flip the cover of your remote con-
1 trol unit for access to the tape func- tion controls. Press the appropriate buttons to control your VCR or DVD.
45 |
Downloaded from www.Manualslib.com manuals search engine
